Thursday, April 20, 2023

Dell EMC Virtual Appliance Manager 9.2.1 Installation Guide or unisphere vapp

 

Launching the vApp Manager

About this task

To launch the vApp Manager:

Steps

  1. Type one of the following URLs in a browser:
    • https://appliance_IP:unisphere_port_number
    • https://appliance_host_name:unisphere_port_number
    The default Unisphere port number is 5480.

    If the host IP address is an IPv6 address, surround the IP address with square brackets, for example:

    https://[2001:db8:ffff:ffff:ffff:ffff:ffff:ffff]:5480

    If the host IP address is an IPv4 address, type the IP address as normal, for example:

    https://198.51.100.255:5480

    For either of the URLs above, the browser is redirected, as shown in the following table.

    ORIGINAL URLREDIRECTED URL
    https://appliance_IP:unisphere_port_ numberhttps://appliance_IP:unisphere_port_ number/vappmgr/#/login
    https://appliance_host_name:unisphere_port_ numberhttps://appliance_IP:unisphere_port_ number/vappmgr/#/login
  2. On the log in panel, type seconfig for both the User and Password, and then click Login.
    The vApp Manager opens. For more information, see the vApp Manager online help.

Additional Information

SSH will need to be enabled after each reboot of the vApp. This is as designed.

The default credentials for SSH / CLI is cseadmin / cseadmin.

No comments: